You may want to reset your network router if you are experiencing constant buffering or other connectivity issues.
Several different router reset methods can be used depending on the situation.
A hard reset is the most drastic type of router reset that’s most commonly used when you wish to start over with fresh settings.
Since the software on the router is reset to factory defaults, a hard reset removes all customization, including passwords, usernames, security keys, port forwarding settings, and custom DNS servers.
Hard resets do not remove or revert the currently-installed version of router firmware, however.
To avoid internet connectivity complications, disconnect all devices from the router before performing hard resets.
How to do it:
- With the router powered on, turn it to the side that has the Reset button. It might be on the back or the bottom.
- With something small and pointy, like a paperclip, hold down the Reset button for 30 seconds.
- After releasing it, wait another 30 seconds for the router to fully reset and power back on.
An alternative method called the 30-30-30 hard reset rule involves holding down the reset button for 90 seconds instead of 30 and can be tried if the basic 30 second version doesn’t work.
Some router manufacturers might have a preferred way to reset their router, and some methods to resetting a router may differ between models.
Shutting off and re-applying power to a router is called power cycling. It’s used to recover from glitches that cause a router to drop connections, such as corruption of the unit’s internal memory, or overheating.
Power cycles do not erase saved passwords, security keys, or other settings saved via the router’s console.
How to do it:
Power to a router can be shut off either by the unit’s on/off switch (if it has one) or by unplugging the power cord. Battery-powered routers must have their batteries removed.
Some people like to wait 30 seconds out of habit, but it’s not necessary to wait more than a few seconds between unplugging and reattaching a router’s power cord. As with hard resets, the router takes time after power is restored to resume operation.
When troubleshooting internet connectivity issues, it can help to reset the connection between the router and your device. Depending on how you want to do it, this may just involve removing the physical connection between the two, not manipulating the software or disabling power.
Compared to other kinds of resets, soft resets take effect almost instantaneously because they don’t require the router to reboot.
How to do it:
Physically unplug the cable connecting the router to your device and then reconnect it after a few seconds.